Active infrared, Thermal vision, Image intensifier

Active infrared

Imaging results with and without active-infrared.

Active infrared night vision combines infrared illumination of spectral range 700nm–1000nm – just below the visible spectrum of the human eye – with CCD cameras sensitive to this light. The resulting scene, which is apparently dark to a human observer, appears as a monochrome image on a normal display device.^[4]

Because active infrared night vision systems can incorporate illuminators that produce high levels of infrared light, the resulting images are typically higher resolution than other night vision technologies.^[5][6] Active infrared night vision is now commonly found in commercial, residential and government security applications, where it enables effective night time imaging under low light conditions. However, since active infrared light can be detected by night vision goggles, it is generally not used in tactical military operations.

Thermal vision

Thermal imaging cameras are excellent tools for night vision. They image emitted thermal radiation and do not need a source of illumination. They produce an image in the darkest of nights and can see through light fog, rain and smoke. Thermal imaging cameras make small temperature differences visible. Thermal imaging cameras are widely used to complement new or existing security networks. See Thermographic camera.

Image intensifier

Main article: Image intensifier

The image intensifier is a vacuum-tube based device that converts visible light from an image so that a dimly lit scene can be viewed by a camera or the naked eye. While many believe the light is "amplified," it is not. When IR light strikes a chargedphotocathode plate, electrons are emitted through a vacuum tube that strike the microchannel plate that cause the image screen to illuminate with a picture in the same pattern as the IR light that strikes the photocathode, and is on a frequency that the human eye can see. This is much like a CRT television, but instead of color guns the photocathode does the emitting.

The image is said to become "intensified" because the output visible light is brighter than the incoming IR light, and this effect directly relates to the difference in passive and active night vision goggles. Currently, the most popular image intensifier is the drop-in ANVIS module, though many other models and sizes are available at the market.